Upcoming events

    • Mon, September 14, 2026
    • 6:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Whether you're here to tinker, build, craft, or explore—New Member Orientation is your first step to becoming an active part of the Waukesha Makerspace community. This session is mandatory for all new members before using the shop or participating in community activities.

    During orientation, you’ll receive a full walkthrough of our space, learn how to safely and respectfully use our tools and equipment, understand our policies, and get your key fob tested and activated. We'll also cover how to reserve storage, find resources, and get involved with volunteer efforts, workshops, and events.

    ⚠️ Registration Code Required:
    To register for orientation, you must enter a registration code. This code can be found in the membership application confirmation email you received after applying for membership. If you cannot locate your code, please reach out to a board member or contact us through the website.

    What to Bring:

    • A government-issued photo ID

    • Your completed liability waiver (or plan to fill it out onsite)

    • Comfortable, closed-toe shoes (you may walk through active shop areas)

    • A positive attitude and any questions you may have!

    Orientation typically lasts 60–90 minutes and is led by one of our amazing volunteers. Please note that sessions may occasionally be canceled or rescheduled, so we appreciate your patience. Orientation is offered periodically throughout each month, so find a time that works for you and sign up early if you can.

    For more details, visit the Orientation page on our wiki:
    https://wiki.waukeshamakers.com/en/Events/Orientation

    • Sat, September 19, 2026
    • 6:30 AM - 12:30 PM
    • 125 W Saint Paul Ave, Waukesha, WI 53188
    Register

    We will be participating in the Waukesha Farmers Market on September 19th this year. 

    We want to grow! 

    We need to get the word out that we are here!

    We need a few people willing to help at this event.

    We will need a few people to help set up at 6:30 am.

    We need a few people who can give us an hour or 2 during the event to talk to people at the market and be able to help inform people about us! 

    Volunteers can participate in the whole event if you are able.

    We will also need a few people to help pack up at the end of the day.

    We only have a 10x10 space and will not likely have a lot of space for chairs for people to sit, please keep that in mind and plan accordingly.

    Renee Love is coordinating with the Farmers Market personnel, if you have any questions feel free to ask Renee directly, or on the discord conversation under committees in the Waukesha Farmers Market channel.

    • Sun, September 27, 2026
    • 5:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Come out and join us as we get together for our monthly fiber arts social! Bring your favorite WIP (or maybe one you've been avoiding!) and enjoy your craft surrounded by other fiber artists. Whether your hobby of choice is knitting, crochet, tatting, weaving, or something else within the fiber arts world, you are welcome! While this is not a structured class, you are welcome and encouraged to ask questions or get some pointers from peers during the social. We don't bite!

    We will meet in the conference room if it is available, otherwise you will find us out in the shop in the leather and fiber arts section. We can't wait to meet you!

    • Tue, September 29, 2026
    • 6:00 PM - 9:00 PM
    • Waukesha Makerspace Conference room
    Register

    Drop Spinning Beginner Class

    What is Drop Spinning?

    What are Fiber Arts?

    Have you ever made anything with yarn?

    Have you ever wondered about how yarn is made?

    Want to give it a try?

    Whether you have never picked up a spindle before or are currently able to lap spin or park and draft, I can make you more comfortable and confident in your future spinning adventures.  We will go over some basic spinning information and terminology; I promise, no pop quizzes.  But I love sharing my love of spinning and nerdy side with some fun science stuff. 

    Bring your spindle or borrow one of mine.  I will also have spindles available for purchase. 

    Approximately 1 oz of fiber will be provided per student.  If you have a drop spindle, feel free to bring it. However, you are still welcome to try one of mine.

    There are no prerequisites for this class.

    The instructor is Renee Love of Wavellite Creative.  (bio below)

    Maximum class size is 6 (due to size of location).

    Note: Full Class cost is $50, 50% Discounts offered for Paid members of the Waukesha Makerspace.

    Payment is required before class. Renee will reach out to registrants for payment. 

    Feel free to email Renee at:  WavelliteCreative@gmail.com

    Please, be sure to register, as space is limited. 

    Additional dates and times will be added as needed.

    BIO:

    Renee has lived in and around Milwaukee, WI, all her life. She was introduced to fiber arts at a young age by an aunt with a Llama farm, and later learned to knit and crochet, still while quite young. This is not the original direction she thought life would take, having earned several college degrees, including a Master of Architecture from UW-Milwaukee. She now fully embraces this fiber arts adventure. Once Renee learned to spin yarn, it became her passion. Spinning yarn more than anything else, has led her to selling her hand-spun and making it her career. Officially founding her business, Wavellite Creative LLC, in early 2021. She has been spinning for years and has been designing drop spindles for almost as long. She also designs and builds spinning wheels by hand. Teaching started with the selling of things to spin yarn with. Discovering a talent and a joy of sharing her love of spinning. Renee has been steadily adding to the options and range of class levels she offers. Renee now travels to many fiber arts festivals around the country to both teach classes and sell her products. You can also find Renee at the Waukesha Makerspace, teaching classes and building spinning wheels.


    Learn more about Renee and her products by visiting her website: www.WavelliteCreative.com

    • Wed, September 30, 2026
    • 6:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Whether you're here to tinker, build, craft, or explore—New Member Orientation is your first step to becoming an active part of the Waukesha Makerspace community. This session is mandatory for all new members before using the shop or participating in community activities.

    During orientation, you’ll receive a full walkthrough of our space, learn how to safely and respectfully use our tools and equipment, understand our policies, and get your key fob tested and activated. We'll also cover how to reserve storage, find resources, and get involved with volunteer efforts, workshops, and events.

    ⚠️ Registration Code Required:
    To register for orientation, you must enter a registration code. This code can be found in the membership application confirmation email you received after applying for membership. If you cannot locate your code, please reach out to a board member or contact us through the website.

    What to Bring:

    • A government-issued photo ID

    • Your completed liability waiver (or plan to fill it out onsite)

    • Comfortable, closed-toe shoes (you may walk through active shop areas)

    • A positive attitude and any questions you may have!

    Orientation typically lasts 60–90 minutes and is led by one of our amazing volunteers. Please note that sessions may occasionally be canceled or rescheduled, so we appreciate your patience. Orientation is offered periodically throughout each month, so find a time that works for you and sign up early if you can.

    For more details, visit the Orientation page on our wiki:
    https://wiki.waukeshamakers.com/en/Events/Orientation


    • Thu, October 08, 2026
    • 6:30 PM - 8:00 PM
    • 2111 S West Ave Unit 58, Waukesha WI 53189
    Register

    Curious what a makerspace actually looks like in real life? Come see it.

    This open house is designed for new and prospective members who want to explore the Waukesha Makerspace, take a guided tour, and ask questions in a relaxed, no-pressure setting. You’ll walk through the shop, see the tools and work areas, meet current members, and get a clear picture of how membership works.

    This event is not a member meeting or business update. It’s purely for people who want to:

    • See the space in person

    • Learn what tools and resources are available

    • Ask questions about memberships, training, and projects

    • Get a feel for the community before deciding if it’s a fit

    No experience required. No commitment expected. Just show up curious.


    • Mon, October 12, 2026
    • 6:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Whether you're here to tinker, build, craft, or explore—New Member Orientation is your first step to becoming an active part of the Waukesha Makerspace community. This session is mandatory for all new members before using the shop or participating in community activities.

    During orientation, you’ll receive a full walkthrough of our space, learn how to safely and respectfully use our tools and equipment, understand our policies, and get your key fob tested and activated. We'll also cover how to reserve storage, find resources, and get involved with volunteer efforts, workshops, and events.

    ⚠️ Registration Code Required:
    To register for orientation, you must enter a registration code. This code can be found in the membership application confirmation email you received after applying for membership. If you cannot locate your code, please reach out to a board member or contact us through the website.

    What to Bring:

    • A government-issued photo ID

    • Your completed liability waiver (or plan to fill it out onsite)

    • Comfortable, closed-toe shoes (you may walk through active shop areas)

    • A positive attitude and any questions you may have!

    Orientation typically lasts 60–90 minutes and is led by one of our amazing volunteers. Please note that sessions may occasionally be canceled or rescheduled, so we appreciate your patience. Orientation is offered periodically throughout each month, so find a time that works for you and sign up early if you can.

    For more details, visit the Orientation page on our wiki:
    https://wiki.waukeshamakers.com/en/Events/Orientation

    • Mon, October 12, 2026
    • 6:30 PM - 8:00 PM
    Register

    Our 3D printers get a lot of use, and they need regular care to keep turning out clean prints. Join us for a hands-on work session where we'll go through the shop's printers together: cleaning, calibrating, and handling routine maintenance so they're ready for everyone's next project.

    No experience needed. If you've never touched a 3D printer, this is one of the best ways to learn. Leveling a bed, cleaning a nozzle, tensioning a belt, and dialing in calibration teaches you more about how these machines work than a stack of finished prints ever will. You'll leave understanding why prints fail and how to fix them.

    If you print at the shop, please come. The printers wear because we use them, and everyone who uses them shares in keeping them running. Being part of the upkeep is part of being a maker here, and it will make you a better printer operator too. We strongly encourage every regular 3D printer user to attend.

    What we'll be working on (depending on what each printer needs):

    • Cleaning build plates, nozzles, fans, and enclosures
    • Leveling beds and calibrating extruders
    • Checking and tensioning belts
    • Lubricating rails and lead screws
    • Resin printer cleanup and vat inspection
    • Inspecting for worn parts and noting what needs replacing
    • Running test prints to confirm everything is dialed in

    What to bring:

    • Just yourself. Tools and supplies are provided.
    • A willingness to get your hands a little dirty
    • Any questions you've had about 3D printing. This is a great time to ask.

    Drop in for the whole session or just part of it. Please let us know you're coming so we can plan work stations and make sure every group has a printer to work on.


    • Wed, October 21, 2026
    • 6:30 PM - 8:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI, 53189
    Register

    AI tools like ChatGPT and Claude are powerful, but only if you know how to talk to them.

    This hands-on class is designed to help everyday makers, creatives, and professionals use AI more effectively and more intentionally. We’ll focus on practical skills, real examples, and habits you can start using immediately.

    Topics will include:

    • How different AI tools think (and why that matters)

    • Writing better prompts to get better results

    • Using AI for learning, planning, writing, coding, and problem-solving

    • Common mistakes that lead to bad or misleading answers

    • Tips for working with AI instead of fighting it

    This session is beginner-friendly, but useful for anyone who feels like they’re “using AI” without fully unlocking its potential.

    Bring a laptop if you’d like to follow along, but it’s not required.


    • Sat, October 24, 2026
    • 1:00 PM - 6:00 PM
    • 2111 S West Ave Unit 58, Waukesha WI 53189
    Register

    This one's just for us.

    No tours, no pitches, no "so what is a makerspace?" conversations. Just the people who make this place what it is, hanging out, catching up, and having a good time together.

    Here's what's happening:

    The Update. We'll kick things off with a quick rundown of what's new: recent upgrades, upcoming workshops, and where the space is headed next. Short, sweet, and worth hearing.

    The Food. We're bringing snacks and drinks. You're bringing your appetite. Simple math. If you'd like to bring something to share, you're welcome to. Totally optional, never required.

    The Hang. This is the main event. Fire up a project you've been meaning to get to, jump into a tabletop game, swap ideas with someone from a totally different shop area, or just grab a seat and talk shop. The space is yours.

    Why this event exists

    We used to pack everything (new member tours, space updates, community time) into one event. It was a lot. So we split it up. Open Houses are now focused on welcoming newcomers. The Member-Only Mixer is your time. No distractions, no agenda beyond connecting with the people who keep this place running.

    We run these quarterly. Swing by even for a bit: grab a snack, say hi, see what folks are working on.

    One ask: Please register so we can order enough food for everyone. Getting an accurate headcount really matters. We'd rather over-prepare than leave anyone hungry. No tickets, no fees. Just a quick RSVP.


    • Sun, October 25, 2026
    • 5:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Come out and join us as we get together for our monthly fiber arts social! Bring your favorite WIP (or maybe one you've been avoiding!) and enjoy your craft surrounded by other fiber artists. Whether your hobby of choice is knitting, crochet, tatting, weaving, or something else within the fiber arts world, you are welcome! While this is not a structured class, you are welcome and encouraged to ask questions or get some pointers from peers during the social. We don't bite!

    We will meet in the conference room if it is available, otherwise you will find us out in the shop in the leather and fiber arts section. We can't wait to meet you!

    • Mon, October 26, 2026
    • 6:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Whether you're here to tinker, build, craft, or explore—New Member Orientation is your first step to becoming an active part of the Waukesha Makerspace community. This session is mandatory for all new members before using the shop or participating in community activities.

    During orientation, you’ll receive a full walkthrough of our space, learn how to safely and respectfully use our tools and equipment, understand our policies, and get your key fob tested and activated. We'll also cover how to reserve storage, find resources, and get involved with volunteer efforts, workshops, and events.

    ⚠️ Registration Code Required:
    To register for orientation, you must enter a registration code. This code can be found in the membership application confirmation email you received after applying for membership. If you cannot locate your code, please reach out to a board member or contact us through the website.

    What to Bring:

    • A government-issued photo ID

    • Your completed liability waiver (or plan to fill it out onsite)

    • Comfortable, closed-toe shoes (you may walk through active shop areas)

    • A positive attitude and any questions you may have!

    Orientation typically lasts 60–90 minutes and is led by one of our amazing volunteers. Please note that sessions may occasionally be canceled or rescheduled, so we appreciate your patience. Orientation is offered periodically throughout each month, so find a time that works for you and sign up early if you can.

    For more details, visit the Orientation page on our wiki:
    https://wiki.waukeshamakers.com/en/Events/Orientation


    • Sun, November 08, 2026
    • 12:30 PM - 3:00 PM
    • Waukesha Makerspace Conference room
    Register

    Drop Spinning Beginner Class

    What is Drop Spinning?

    What are Fiber Arts?

    Have you ever made anything with yarn?

    Have you ever wondered about how yarn is made?

    Want to give it a try?

    Whether you have never picked up a spindle before or are currently able to lap spin or park and draft, I can make you more comfortable and confident in your future spinning adventures.  We will go over some basic spinning information and terminology; I promise, no pop quizzes.  But I love sharing my love of spinning and nerdy side with some fun science stuff. 

    Bring your spindle or borrow one of mine.  I will also have spindles available for purchase. 

    Approximately 1 oz of fiber will be provided per student.  If you have a drop spindle, feel free to bring it. However, you are still welcome to try one of mine.

    There are no prerequisites for this class.

    The instructor is Renee Love of Wavellite Creative.  (bio below)

    Maximum class size is 6 (due to size of location).

    Note: Full Class cost is $50, 50% Discounts offered for Paid members of the Waukesha Makerspace.

    Payment is required before class. Renee will reach out to registrants for payment. 

    Feel free to email Renee at:  WavelliteCreative@gmail.com

    Please, be sure to register, as space is limited. 

    Additional dates and times will be added as needed.

    BIO:

    Renee has lived in and around Milwaukee, WI, all her life. She was introduced to fiber arts at a young age by an aunt with a Llama farm, and later learned to knit and crochet, still while quite young. This is not the original direction she thought life would take, having earned several college degrees, including a Master of Architecture from UW-Milwaukee. She now fully embraces this fiber arts adventure. Once Renee learned to spin yarn, it became her passion. Spinning yarn more than anything else, has led her to selling her hand-spun and making it her career. Officially founding her business, Wavellite Creative LLC, in early 2021. She has been spinning for years and has been designing drop spindles for almost as long. She also designs and builds spinning wheels by hand. Teaching started with the selling of things to spin yarn with. Discovering a talent and a joy of sharing her love of spinning. Renee has been steadily adding to the options and range of class levels she offers. Renee now travels to many fiber arts festivals around the country to both teach classes and sell her products. You can also find Renee at the Waukesha Makerspace, teaching classes and building spinning wheels.


    Learn more about Renee and her products by visiting her website: www.WavelliteCreative.com

    • Sun, November 08, 2026
    • 3:30 PM - 6:30 PM
    • Waukesha Makerspace Conference room
    Register

    You must have taken the "Intro to Hand spinning Yarn on Drop Spindle" class with Renee recently and or are registered for the one right before this. 

    If you already know how to drop spin you are welcome to sign up.

    Bring your spindle or borrow one of mine.  I will also have spindles available for purchase. 

    We are going to make some amazing Art yarn Then you will learn to weave with the yarn you just spun. You will have an opportunity to design your yarn for the purpose of your individual project!

    There will be several options of items to weave:

    A small wall decoration, tree ornament, pin or pendant, or the start of a larger project that you will continue with after the class on your own (larger looms will be available for purchase). 

    Approximately 3 oz of fiber will be provided per student.  If you have a drop spindle, feel free to bring it. However, you are still welcome to try one of mine.

    Additionally, a small wooden loom and warp will be provided.

    There will be options for looms you can keep and options for looms you can additionally purchase.

    The instructor is Renee Love of Wavellite Creative.  (bio below)

    Maximum class size is 6 (due to size of location).

    Note: Class fee is $60. There is a $25 Discounts offered for Paid members of the Waukesha Makerspace.

    Payment is required before class. Renee will reach out to registrants for payment. 

    Feel free to email Renee at:  WavelliteCreative@gmail.com

    Please, be sure to register, as space is limited. 

    Additional dates and times will be added as needed.

    BIO:

    Renee has lived in and around Milwaukee, WI, all her life. She was introduced to fiber arts at a young age by an aunt with a Llama farm, and later learned to knit and crochet, still while quite young. This is not the original direction she thought life would take, having earned several college degrees, including a Master of Architecture from UW-Milwaukee. She now fully embraces this fiber arts adventure. Once Renee learned to spin yarn, it became her passion. Spinning yarn more than anything else, has led her to selling her hand-spun and making it her career. Officially founding her business, Wavellite Creative LLC, in early 2021. She has been spinning for years and has been designing drop spindles for almost as long. She also designs and builds spinning wheels by hand. Teaching started with the selling of things to spin yarn with. Discovering a talent and a joy of sharing her love of spinning. Renee has been steadily adding to the options and range of class levels she offers. Renee now travels to many fiber arts festivals around the country to both teach classes and sell her products. You can also find Renee at the Waukesha Makerspace, teaching classes and building spinning wheels.


    Learn more about Renee and her products by visiting her website: www.WavelliteCreative.com

    • Tue, November 10, 2026
    • 6:30 PM - 8:00 PM
    • 2111 S West Ave Unit 58, Waukesha WI 53189
    Register

    New to 3D modeling? This hands-on class covers the core skills you need to start designing your own parts in Fusion 360, the free, professional-grade CAD software used by makers, engineers, and hobbyists worldwide.

    In 90 minutes, you'll go from a blank canvas to a finished 3D model you can take home and print. We'll cover:

    • Sketching: Drawing 2D shapes with dimensions and constraints
    • Extruding: Turning flat sketches into solid 3D objects
    • Cutting: Adding holes, pockets, and slots to your designs
    • Filleting: Rounding edges for a polished, professional look

    By the end of class, you'll build a custom phone stand using every technique covered, and you'll have the skills to start designing your own projects.

    Prerequisites:

    • You must be comfortable using a laptop on your own (file management, installing software, navigating applications)
    • Fusion 360 must be installed, opened, and your free Autodesk account created BEFORE class. Setup instructions are included below. Please complete them when you register, not the night before. We will not have time for installation or account troubleshooting during class. If you arrive without Fusion 360 ready to go, you will not be able to participate.

    What to bring:

    • Your laptop with Fusion 360 installed and ready
    • A mouse (strongly recommended; trackpads work but make 3D navigation much harder)

    No CAD experience required. This class assumes zero 3D modeling knowledge. But you should be comfortable using your laptop. This is not an introduction to computers.

    Class size is limited to 6 participants to ensure everyone gets individual attention. Registration is required. You must register through this event page and receive a confirmation email to attend. If you did not receive a confirmation email, you are not registered and will not be able to participate. Walk-ins cannot be accommodated due to the small class size.

    Setup Instructions:

    1. Go to https://www.autodesk.com/products/fusion-360/personal
    2. Create a free Autodesk account and select the "Personal Use" license
    3. Download and install Fusion 360
    4. Open Fusion 360, sign in, and confirm it loads to a blank design
    5. You're ready for class!


    • Thu, November 12, 2026
    • 6:30 PM - 8:00 PM
    • 2111 S West Ave Unit 58, Waukesha WI 53189
    Register

    Curious what a makerspace actually looks like in real life? Come see it.

    This open house is designed for new and prospective members who want to explore the Waukesha Makerspace, take a guided tour, and ask questions in a relaxed, no-pressure setting. You’ll walk through the shop, see the tools and work areas, meet current members, and get a clear picture of how membership works.

    This event is not a member meeting or business update. It’s purely for people who want to:

    • See the space in person

    • Learn what tools and resources are available

    • Ask questions about memberships, training, and projects

    • Get a feel for the community before deciding if it’s a fit

    No experience required. No commitment expected. Just show up curious.


    • Sat, November 14, 2026
    • 3:00 PM - 7:00 PM
    • 2111 S West Ave Unit 58, Waukesha WI 53189
    Register

    Get ready for an afternoon of fun, friendly competition, and community! All members are welcome, and so are your guests. Whether you're a seasoned strategist or just learning your first game, there's something for everyone.

    The shop has dozens of board games to choose from, and you're welcome to bring your personal favorites as well. We'll be teaching games throughout the event (many are quick and easy to pick up, and Dominion is a personal favorite!).

    Feel free to bring food for yourself or something to share, but no pressure. Just bring yourself and an interest in having fun. We'll have tables set up for smaller groups (most games accommodate 4 to 5 players), and if there's interest near the end, we may fire up some Jackbox party games for a lighthearted group experience.

    Let us know you're coming, and we'll save you a seat at the table.

    • Mon, November 16, 2026
    • 6:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Whether you're here to tinker, build, craft, or explore—New Member Orientation is your first step to becoming an active part of the Waukesha Makerspace community. This session is mandatory for all new members before using the shop or participating in community activities.

    During orientation, you’ll receive a full walkthrough of our space, learn how to safely and respectfully use our tools and equipment, understand our policies, and get your key fob tested and activated. We'll also cover how to reserve storage, find resources, and get involved with volunteer efforts, workshops, and events.

    ⚠️ Registration Code Required:
    To register for orientation, you must enter a registration code. This code can be found in the membership application confirmation email you received after applying for membership. If you cannot locate your code, please reach out to a board member or contact us through the website.

    What to Bring:

    • A government-issued photo ID

    • Your completed liability waiver (or plan to fill it out onsite)

    • Comfortable, closed-toe shoes (you may walk through active shop areas)

    • A positive attitude and any questions you may have!

    Orientation typically lasts 60–90 minutes and is led by one of our amazing volunteers. Please note that sessions may occasionally be canceled or rescheduled, so we appreciate your patience. Orientation is offered periodically throughout each month, so find a time that works for you and sign up early if you can.

    For more details, visit the Orientation page on our wiki:
    https://wiki.waukeshamakers.com/en/Events/Orientation


    • Fri, December 04, 2026
    • 6:30 PM - 8:00 PM
    • 2111 S West Ave Unit 58, Waukesha WI 53189
    Register

    Curious what a makerspace actually looks like in real life? Come see it.

    This open house is designed for new and prospective members who want to explore the Waukesha Makerspace, take a guided tour, and ask questions in a relaxed, no-pressure setting. You’ll walk through the shop, see the tools and work areas, meet current members, and get a clear picture of how membership works.

    This event is not a member meeting or business update. It’s purely for people who want to:

    • See the space in person

    • Learn what tools and resources are available

    • Ask questions about memberships, training, and projects

    • Get a feel for the community before deciding if it’s a fit

    No experience required. No commitment expected. Just show up curious.


    • Mon, December 07, 2026
    • 6:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Whether you're here to tinker, build, craft, or explore—New Member Orientation is your first step to becoming an active part of the Waukesha Makerspace community. This session is mandatory for all new members before using the shop or participating in community activities.

    During orientation, you’ll receive a full walkthrough of our space, learn how to safely and respectfully use our tools and equipment, understand our policies, and get your key fob tested and activated. We'll also cover how to reserve storage, find resources, and get involved with volunteer efforts, workshops, and events.

    ⚠️ Registration Code Required:
    To register for orientation, you must enter a registration code. This code can be found in the membership application confirmation email you received after applying for membership. If you cannot locate your code, please reach out to a board member or contact us through the website.

    What to Bring:

    • A government-issued photo ID

    • Your completed liability waiver (or plan to fill it out onsite)

    • Comfortable, closed-toe shoes (you may walk through active shop areas)

    • A positive attitude and any questions you may have!

    Orientation typically lasts 60–90 minutes and is led by one of our amazing volunteers. Please note that sessions may occasionally be canceled or rescheduled, so we appreciate your patience. Orientation is offered periodically throughout each month, so find a time that works for you and sign up early if you can.

    For more details, visit the Orientation page on our wiki:
    https://wiki.waukeshamakers.com/en/Events/Orientation

    • Wed, December 09, 2026
    • 6:00 PM - 7:00 PM
    • 2111 S West Ave, Unit 58, Waukesha WI 53189
    Register

    Whether you're here to tinker, build, craft, or explore—New Member Orientation is your first step to becoming an active part of the Waukesha Makerspace community. This session is mandatory for all new members before using the shop or participating in community activities.

    During orientation, you’ll receive a full walkthrough of our space, learn how to safely and respectfully use our tools and equipment, understand our policies, and get your key fob tested and activated. We'll also cover how to reserve storage, find resources, and get involved with volunteer efforts, workshops, and events.

    ⚠️ Registration Code Required:
    To register for orientation, you must enter a registration code. This code can be found in the membership application confirmation email you received after applying for membership. If you cannot locate your code, please reach out to a board member or contact us through the website.

    What to Bring:

    • A government-issued photo ID

    • Your completed liability waiver (or plan to fill it out onsite)

    • Comfortable, closed-toe shoes (you may walk through active shop areas)

    • A positive attitude and any questions you may have!

    Orientation typically lasts 60–90 minutes and is led by one of our amazing volunteers. Please note that sessions may occasionally be canceled or rescheduled, so we appreciate your patience. Orientation is offered periodically throughout each month, so find a time that works for you and sign up early if you can.

    For more details, visit the Orientation page on our wiki:
    https://wiki.waukeshamakers.com/en/Events/Orientation


Past events

Wed, September 09, 2026 Open House & Tour
Tue, September 08, 2026 Stick/Mig Welding 101: From Spark to Bead
Tue, September 01, 2026 Laser Cutter, S1 40w '101' class
Sun, August 30, 2026 Laser Cutter, S1 40w Maintenance class
Sun, August 23, 2026 Fiber Arts Social
Mon, August 10, 2026 New Member Orientation w/Brian
Sun, August 09, 2026 Waukesha Makerspace Summer Picnic: BYO Everything, Bring the Vibes
Thu, August 06, 2026 New Member Orientation w/Oz
Tue, August 04, 2026 Open House & Tour
Mon, July 27, 2026 New Member Orientation w/Brian
Sun, July 26, 2026 Fiber Arts Social
Tue, July 21, 2026 Board of Directors Meeting
Wed, July 15, 2026 New Member Orientation w/Oz
Mon, July 13, 2026 Open House & Tour
Tue, July 07, 2026 New Member Orientation w/Tom
Mon, June 29, 2026 New Member Orientation w/Brian
Tue, June 16, 2026 Membership Planning Committee – Trial member training and Alternate funding for sponsored memberships.
Sat, June 13, 2026 Intermediate Drop Spindle (canceled due to low registration)
Mon, June 08, 2026 New Member Orientation w/Oz
Fri, June 05, 2026 Open House & Tour
Tue, June 02, 2026 New Member Orientation w/Tom
Sat, May 30, 2026 Member-Only Mixer
Wed, May 20, 2026 Table Saw Basics
Tue, May 19, 2026 New Member Orientation w/Oz
Sat, May 16, 2026 Drop Spindle beyond basics
Sat, May 16, 2026 Intro to Hand spinning Yarn on Drop Spindle
Mon, May 11, 2026 New Member Orientation w/Brian
Thu, May 07, 2026 Open House & Tour
Tue, May 05, 2026 New Member Orientation w/Tom
Mon, May 04, 2026 New Member Orientation w/Erik
Tue, April 21, 2026 New Member Orientation w/Tom
Sun, April 19, 2026 Fiber Arts Social
Mon, April 13, 2026 New Member Orientation w/Brian
Wed, April 08, 2026 Table Saw Basics
Tue, April 07, 2026 Board of Directors Meeting — April 2026
Tue, April 07, 2026 New Member Orientation w/Tom
Thu, April 02, 2026 New Member Orientation w/Oz
Wed, April 01, 2026 Open House & Tour
Tue, March 31, 2026 Hack Pack Night Series at Waukesha Makerspace
Mon, March 30, 2026 Slicer Basics (using Prusa, but also applies to Bambu)
Sun, March 29, 2026 Shop Media Day — Drone Fly-Through Filming
Sat, March 28, 2026 New Member Orientation w/Casey
Mon, March 23, 2026 3-D Printing 101
Sun, March 22, 2026 Spring 2026 Board Game Night
Thu, March 19, 2026 New Member Orientation w/Oz
Wed, March 18, 2026 Fusion 360 Basics: From Sketch to Solid
Mon, March 16, 2026 New Member Orientation w/Brian
Sun, March 15, 2026 Fiber Arts Social
Sat, March 07, 2026 M.O.M. — Members Only Mixer: Our First One!
Tue, March 03, 2026 Open House & Tour
Wed, February 25, 2026 Hack Pack Night Series at Waukesha Makerspace
Sat, February 21, 2026 Intermediate Drop Spindle
Sat, February 21, 2026 Drop Spindle beyond basics
Wed, February 18, 2026 3-D Printing 101
Mon, February 16, 2026 New Member Orientation w/Brian
Wed, February 11, 2026 Stick Welding 101: From Spark to Bead
Tue, February 10, 2026 Practical AI: Getting More Out of ChatGPT, Claude, and Friends
Wed, February 04, 2026 New Member Orientation w/Oz
Mon, February 02, 2026 Open House & Tour
Sat, January 31, 2026 Intro to Hand spinning Yarn on Drop Spindle
Tue, January 27, 2026 Hack Pack Night Series at Waukesha Makerspace
Sat, January 24, 2026 New Member Orientation w/Casey
Wed, January 21, 2026 Stick Welding 101: From Spark to Bead
Tue, January 20, 2026 New Member Orientation w/Tom
Thu, January 15, 2026 New Member Orientation w/Oz
Wed, January 07, 2026 Hack Pack Night Series at Waukesha Makerspace
Tue, January 06, 2026 Board Meeting
Sun, January 04, 2026 Open House & Tour
Sat, December 20, 2025 New Member Orientation w/Casey
Tue, December 16, 2025 New Member Orientation w/Brian
Tue, December 09, 2025 Membership Planning Committee – Session #3: Refining the 2026 Membership Model
Tue, December 09, 2025 New Member Orientation w/Tom
Thu, December 04, 2025 New Member Orientation w/Wally
Wed, December 03, 2025 Milwaukee Maker Faire Retrospective Meeting
Tue, November 25, 2025 Hack Pack Night Series at Waukesha Makerspace
Sat, November 22, 2025 Intro to Hand spinning Yarn on Drop Spindle
Tue, November 18, 2025 New Member Orientation w/Brian
Sun, November 16, 2025 Fall 2025 Board Game Night
Thu, November 06, 2025 New Member Orientation w/Wally
Tue, November 04, 2025 Membership Planning Committee – Session #2
Tue, November 04, 2025 New Member Orientation w/Tom
Wed, October 22, 2025 Hack Pack Night Series at Waukesha Makerspace
Tue, October 21, 2025 Membership Planning Committee Meeting – Free Tier Brainstorm
Sat, October 18, 2025 New Member Orientation w/Casey
Wed, October 15, 2025 Open House & Community Night Planning – Committee Kickoff Meeting
Wed, October 15, 2025 New Member Orientation w/Brian
Tue, October 07, 2025 New Member Orientation w/Tom
Sun, October 05, 2025 Milwaukee Maker Faire Committee Meeting – Final Booth Planning
Tue, September 30, 2025 Shop Airline Installation Party
Wed, September 17, 2025 New Member Orientation w/Brian
Tue, September 09, 2025 New Member Orientation w/Tom
Thu, September 04, 2025 New Member Orientation w/Wally
Sat, August 16, 2025 New Member Orientation w/Casey
Tue, August 05, 2025 Milwaukee Maker Faire Committee Kickoff Meeting
Tue, August 05, 2025 New Member Orientation w/Tom
Tue, July 22, 2025 New Member Orientation w/Brian
Sat, July 19, 2025 Beginning Drop Spinning
Sat, June 28, 2025 Drop Spinning Beyond Basics: Deposit and class registration
Thu, June 26, 2025 Beginning Drop Spinning
Sat, June 21, 2025 New Member Orientation
Tue, June 17, 2025 New Member Orientation
Tue, June 10, 2025 New Member Orientation
Sun, June 08, 2025 Sunday Funday: 3D Printer Maintenance & Munchies!
Sat, May 24, 2025 New Member Orientation
Sat, May 17, 2025 2025 Spring Cleaning Event
Sun, May 04, 2025 Open House
© Waukesha Makerspace Inc. All rights reserved.
Powered by Wild Apricot Membership Software